PENILAIAN RISIKO KERJA MENGGUNAKAN METODE HIRARC DI PT. SINAR LAUT INDAH NATAR LAMPUNG SELATAN

Dwi Desianna, Prayudhy Yushananta

Abstract


PT Sinar Laut Indah is a concrete manufacturing plant that has a risk of occupational accidents and occupational diseases due to exposure to particulates, use of work tools, and work methods. The purpose of this research is to find out what are the dangers in a factory, to assess the risk (risk assessment) and risk control (risk control) at each work stage using the HIRARC method.

The work risk assessment uses the HIRARC method, which consists of three stages of assessment, namely hazard identification, risk assessment and risk control. The research subjects were all activities in the paving block production section including tools, materials and work processes. Data collection was carried out by observing and measuring exposure, which was then standardized using two risk assessment parameters, namely probability/likelihood of hazard and severity of the hazard. Risk control is the final stage formulated based on the results of the risk assessment from the previous stage.

The results of the study found 4 activities in the high category, mixing and stirring of materials, checking rolling boxes, paving blocks presseing, and cleaning the remaining material. The highest risk of occupational diseases is respiratory problems and skin or eye irritation during the mixing and stirring activities of the ingredients, as well as cleaning the remaining materials. Meanwhile, the highest risk of work-related accidents is in rolling box-checking activities.

The use of the HIRARC method and the application of probability/likelihood of hazard and severity of hazard are good enough to assess the risk of occupational accidents and occupational diseases. Carrying out repair and maintenance of machines, determining danger zones, using personal protective equipment, and administrative controls are efforts that must be made to avoid risks due to work


Keywords


HIRARC, Risk assessment, Safety, Risk

References


Anthony, M. B. (2019). Analisis Risiko Kerja Pada Area Hot Metal Treatment Plant Divisi Blast Furnace Dengan Metode Hazard Identification And Risk Assessment (HIRA). Jurnal INTECH Teknik Industri Universitas Serang Raya, 5, 35–42. https://doi.org/10.30656/intech.v5i1.1461

BPJS-Ketenagakerjaan. (2019). Angka Kecelakaan Kerja Cenderung Meningkat, BPJS Ketenagakerjaan Bayar Santunan Rp1,2 Triliun. Retrieved July 28, 2020, from BPJS Ketenagakerjaan website: https://www.bpjsketenagakerjaan.go.id/berita/23322/Angka-Kecelakaan-Kerja-Cender

Diniari, H. R., Eka Prasetya, T. A., Nawawiwetu, E. D., & Tualeka, A. R. (2017). Noise Risk Assessment at Air Separation Plant PT. X Surabaya (Nitrogen, Oxygen, and Argon Plant). Journal Of Vocational Health Studies, 1(2), 70. https://doi.org/10.20473/jvhs.V1.I2.2017.70-74

Indragiri, S., & Yuttya, T. (2020). Manajemen Risiko K3 Menggunakan Hazard Identification Risk Assessment And Risk Control (HIRARC). Jurnal Kesehatan, 9(1), 1080–1094. https://doi.org/10.38165/jk.v9i1.77

Industry Safe. (2018). Risk Matrix Calculations – Severity, Probability, and Risk Assessment. Retrieved July 28, 2020, from https://www.industrysafe.com/blog/risk-matrix-calculations-severity-probability-and-risk-assessment/

Kusumawardhani, D., Kasjono, H. S., & Purwanto, P. (2017). Analisis Hazard Identification, Risk Assessment, and Risk Control (HIRARC) di Bagian Finishing 2 Industri Serikat Pekerja Aluminium Sorosutan Tahun 2017. Sanitasi: Jurnal Kesehatan Lingkungan, 9(1), 1. https://doi.org/10.29238/sanitasi.v9i1.40

Nalhadi, A., & Rizaal, A. (2015). Identifikasi Bahaya Dan Penilaian Risiko K3 Pada Tindakan Perawatan & Perbaikan Menggunakan Metode HIRARC.

Naval Safety Centre. (2018). The process of detecting hazards and assessing associated risks The process of detecting hazards and assessing associated risks Risk Assessment What is Risk Assessment? Retrieved July 28, 2020, from https://www.faa.gov/about/initiatives/maintenance_hf/library/documents/media/hfacs/4_riskassessment.pdf

OHSAS. (2007). Sistem manajemen keselamatan dan kesehatan kerja ­ Persyaratan Occupational health and safety management systems-Requirements Translated by Jack Matatula.

Permenaker RI No. 5/2017. Peraturan Menteri Ketenaga Kerjaan Republik Indonesia No. 5 tahun 2018 tentang Keselamatan dan Kesehatan Kerja Lingkungan Kerja. , 4 Jurnal Pendidikan, Teknologi dan Kejuruan § (2018).

Putri, R. N., & Trifiananto, M. (2019). Analisa Hazard Identification Risk Assessment And Risk Control (HIRARC) Pada Perguruan Tinggi Yang Berlokasi Di Pabrik. Seminar Dan Konferensi Nasional IDEC 2019, B11.1-B11.10. Surakarta.

Saputra, A. D. (2015). Gambaran Potensi Bahaya dan Penilaian Risiko Keselamatan dan Kesehatan Kerja Di Bagian Spinning IV Production PT. Asia. Pacific Fibers, TBK. Kabupaten Kendal. 1–114.

Sincihu, Y., Dinata, M., & Taurusia, M. (2019). Investigation of Noise Induced Hearing Loss at Shipyard Company, Surabaya Investigasi Gangguan Pendengaran akibat Bising di Perusahaan Galangan Kapal, Surabaya. The Indonesian Journal of Occupational Safety and Health, 8, 325–331. https://doi.org/10.20473/ijosh.v8i3.2019.325-331

Society, A. C. (2020). Risk Rating & Assessment - American Chemical Society. Retrieved July 28, 2020, from https://www.acs.org/content/acs/en/chemical-safety/hazard-assessment/fundamentals/risk-assessment.html website: https://www.acs.org/content/acs/en/chemical-safety/hazard-assessment/fundamentals/risk-assessment.html

Standards, C. of, & Australia. (1999). Risk Management AS/NZS 4360:1999 (2nd ed.). Retrieved from http://www.epsonet.eu/mediapool/72/723588/data/2017/AS_NZS_4360-1999_Risk_management.pdf

Supriyadi, S., & Ramdan, F. (2017). Hazard Identification And Risk Assessment In Boiler Division Using Hazard Identification Risk Assessment And Risk Control (HIRARC). Journal of Industrial Hygiene and Occupational Health, 1(2), 161. https://doi.org/10.21111/jihoh.v1i2.892

Urrohmah, D. S., & Riandadari, D. (2019). Identifikasi Bahaya Dengan Metode Hazard Identification, Risk Assessment and Risk Control (Hirarc) Dalam Upaya Memperkecil Risiko Kecelakaan Kerja Di Pt. Pal Indonesia. Jurnal Pendidikan Teknik Mesin, 8(1), 34–40.

USPAS. (2012). Controlling Risks Risk Assessment.

Zeinda, E. M., & Hidayat, S. (2017). Risk Assessment Kecelakaan Kerja Pada Pengoperasian Boiler Di PT. Indonesia Power Unit Pembangkitan Semarang. The Indonesian Journal of Occupational Safety and Health, 5(2), 183. https://doi.org/10.20473/ijosh.v5i2.2016.183-191




DOI: http://dx.doi.org/10.26630/rj.v14i1.2147

Refbacks

  • There are currently no refbacks.


Publish by: Department of Environmental Health, Tanjungkarang Health Polytechnic

ISSN Online 2723-7796 | ISSN Print  1978-6204
Jl. H. Mena No.100, Hajimena, Kec. Natar, Kabupaten Lampung Selatan, Lampung 35145.
Telepon 0721-703630, email:  ruwajurai@poltekkes-tjk.ac.id


Statistik Pengunjung:

Lihat Statistik Saya


Lisensi Creative Commons
Jurnal Kesehatan dilisensikan di bawah Lisensi Internasional Creative Commons Attribution-NonCommercial 4.0 .